Description
EAB Tool 2100007 13″ Laminate Floor Cutter with Installation Kit
For quick, quiet and clean installations of laminate and engineered wood flooring. Maximum cutting width: 13″ (330mm). maximum cutting depth: 5/8 inch (16mm).
Heavy duty, aluminum and steel framework, with solid ABS work surface. Handle can be extended for additional leverage and easy cutting. Replaceable blade can be re-sharpened with included sharpening Stone.
EAB Tool 2100009 13″ Industrial Laminate Floor Cutting Replacement Blade – Recyclable,
Replacement blade for 13″ laminate floor Cutter precision cuts with No splintering or chipping go Green and recycle this product
AmazonReviewer –
Works greatThis is my 3rd time doing laminate floors but my 1st time using this item it saves so much time being able to cut inside the home and not having to walk outside or down the stairs or to the garage also no dust at all compared to using a miter saw DEFINITELY RECOMMEND. I didn’t like the angle arm because it moved are to easily but all my cuts were straight so I just put some screws through the deck of the cutter to make sure all my cuts were at 90 degrees
Steve –
Awesome tool for cutting 12mm engineered wood floorMy current project has me installing the entire 2nd story of my house with 12mm engineered wood flooring so I purchase the 13″ cutter. I have installed floors elsewhere in the house and always hated going outside to the chop saw to cut boards. I can now have this tool in the room where I am working, saving time, and avoiding stairs, saw noise, the resulting dust, and quickly wearing out expense 12″ blades. I do find that despite the cutting guide, I have to pay more attention to getting a true 90-degree cut, as well as the correct cut line for those cuts where length is really important. This tool is truly a lifesaver.
tom –
Works greatSaves a lot of time
hoshemon –
Works but not as I expected for “Industrial” cutter.I decided not to save money on quality tool. Assembly wasn’t hard but the part you adjust angle with is flimsy. Plus, the blade still leaves some chips on the edge of laminate plank. No matter what side is up.But still better then using a table saw.Most important it saves you time without having a lot of mess.
Chris Flach, Flach Contracting –
WONT LOCK IN THE CLOSED POSITIONHANDLE WILL NOT LOCK IN THE CLOSED POSITION. SLIDE LOCK DOES NOT ENGAGE
mira –
best money ever spentI am 90lbs woman and have no effort to cut it! Super easy to assemble and use! Definitely worth buying it
STABERDEARTH –
Well built, easy to adjust, easy to sharpen, easy to assembleThere is not much to say about this laminate floor cutter. It is a brute, cuts cleanly (keep the blade sharp!) and accurately. It has a very smooth, gliding, and positive feel to it. This cutter has reduced my floor install time by at least 20-25% since there is little up/down off the floor to make cuts and essentially no cleanup.The only thing that would push this unit over the top with me is putting a storage system underneath the hollow. With a slight redesign of the tapping block, all accessories, including the hex wrenches, could be stored with the cutter keeping everything in its place and so you don’t have to hunt for all of it since you’re going to use most of it anyway in an installation. I’m in the process of designing my own. Take note manufacturer. This would be an attractive added bonus.
Amazon Customer –
Works OK.This is a good product and does what it says it will do. The major drawback is the telescoping handle. The ball detent does not stay put and the handle can suddenly collapse. Very poor design. I drilled a hole through both sections of the handle and inserted a bolt to keep the handle in place. A removeable pin with a short retaining chain or cable to keep it from being lost would be a much better design.
Lari Marco –
May work well with other laminatesI had very high hopes and was excited to receive the cutter on time.PROS:- relatively easy to assemble- cleanly cuts most laminates you can find at the big box stores. I tried a variety of 12mm laminate samples (Pergo, Allen + Roth, TrafficMaster, etc.)CONS:- the locking mechanism is not well aligned, though only a minor issue for me because it still locks- if you are considering to use this to cut the Floor and Decor AquaGuard Water-Resistant Laminate, similar to mine SKU: 100489814, then this won’t be able to cut cleanly. I find that the laminate core is too tough for the blade to handle.Since I have tested this with any other laminates and found it to cut those cleanly, I am still giving it the high rating and will recommend it to anybody to give it a try. Customer Service is also excellent, and quick to respond.I’m forced to use the SKIL Flooring Saw, even though I’d rather not use any saw for cutting if I can avoid because I’m allergic to dust. I’ll have a separate review on the SKIL 3601-02.
Robert Parker –
Accurate and EasyThis saved me a ton of time and mess. Had 3200ft of LVP to put in and it worked like a dream. The miter saw stayed in the truck. The sharpen stone worked flawlessly. I ran the stone a couple quick times during the job but never noticed a bad edge on any cut. Nice tool that quickly pays for itself.