Description
Product Description
Clean Water For A Safe Home
The Express Water 3-stage Whole House System means no more worrying about your home’s water. With specially engineered high flow filtration you can have crisp, clean drinking water from any faucet with no drop in your water pressure.
Our Whole House System is designed to be easy to use and efficient, and our simple “point of entry” filtration system supplies high volumes of filtered water to the entire house at once with no wastewater and no chemicals added.
You can shower without harsh chlorine, prevent your plants from building up rust and other damaging sediments, give healthier water to your pets, and cook with great tasting pure water all at the same time, while also extending the life and reducing the energy cost of your dishwasher, laundry machine, and other appliances, and protecting them from buildups of dirt, rust, and chemical impurities.
Have cleaner, more convenient water than any pitcher, faucet filter, or showerhead system. Express Water’s 3-Stage Whole House Water Filtration System WH300SCGS is the complete solution for your home – make your house a clean water house today!
Express Water Advantage
Only from Express Water! We designed the 3-Stage Whole House Filtration System to be easy to install, and offer several features unique to our systems.
- Save on water! Our filter doesn’t send any water down the drain
- Triple filtered water for your entire home with no pressure loss – the high flow design of our durable, heavy-duty Whole House System can supply up to 0.25 gallons per SECOND
- Solid free standing Stainless Steel Frame: Mounted or ground installation, and easier filter changes, while also adding a protective buffer for your system. Use your system your way!
- 3 housings made with high quality, durable, 100% food-grade ABS and PCE plastic – the Express Water 3-Stage Whole House Filtration System is built to last!
- Includes three accessible pressure release buttons for easy filter change
- Three pressure gauges included! Monitor your system’s performance, know which filters you need to change and when to change them
- Standard 1” connections and long high efficiency housings for easy adaptability and high flow
- Our clear 1st stage filter housing allows you to confirm when your filter needs replacing without dismantling the system
- Simple twist off housings and drop-and-go filter design takes the hassle out of your filter change
- Free lifetime support
This system is designed to be used in a dry level area protected from freezing temperatures and direct sunlight. Each housing is connected with industrial bonded high capacity flow connectors, and every connection is rated for up to 0.25 gallons per second at 45-80 psi, and water temperatures between 40-100℉.
Whole House
Stage 1: Sediment (SED)
Stage 2: Granular Activated Carbon (GAC)
Stage 3: Activated Carbon Block (ACB)
Amazon Customer –
Nice SystemInstalled system today, my advice is to use shark bite fittings, easier to tighten any fittings that are going to leak. Not too difficult to install, but I did have to rearrange the filters because of how water entered house. Not a big issue. What surprised me was how dirty pre filter is with just flushing out new system. No longer white and already turning brown, I am on City water and didn’t expect that to happen so early. Glad I got system installed. I would recommend this system.
John –
Didnt know my water was this badWe are on city water. We usually drink filtered water or bottled water but we bathe and launder our clothes on tap. About a year ago i started developing a rash that spread over my arms and legs and back. My wife also noticed really itchy skin and red spots. After much diet adjustment and some dermatologist visits we decided to see if our water was the problem. We dont have a water softener and we do have hard water. A cheap water test didnt show anything too concerning except an elevated chlorine marker, but still within normal range.I researched water filters and decided on this for its relatively low initial cost. Install was easy, tho buying the sharkbite connections was expensive as i setup a bypass. I used a lot of teflon tape and a 1inch male to male brass nipple that connected to a 1inch to 3/4 sharkbite water softener hose, which then connects to 3/4 pex. I check it daily for leaks and havent noticed any. I also put a leak detector in the area to alert us if something happens.The unit is bigger than the pictures suggest and it feels very well made. I attached pictures of day 1 vs day 4 and theres significant discoloration of the sediment filter after only 4 days. We also have noticed greatly improved skin after only a few days. I greatly believe that what goes in our body has a huge effect on our health i just never considered that our cities water was bad enough to cause such dramatic symptoms.The filters are going to run about $100-$125 a year but we were already paying 50-80 just for fridge filters and this does the whole house. It sucks that we have to have that expense considering how much we pay for water supply but i wouldnt be surprised if more health issues are due to something we take for granted like water whether its Overtreatment or undertreatment.
Nick Blady Jr –
Very good filter system with a couple flawsThis seems to be a well made filter system however I have experienced a couple of issues that other reviewers have noted.Two of the three pressure gauges are not showing pressure. The system was shipped with what appears to be a rubber gasket in the 1/4 inch NPT port. NPT is designed to seal at the wedge threads, therefore the gasket in the port is unnecessary (and likely contributing to the blockage.)The 1 inch NPT ports on the housing (inlet/outlet) are over-bored. NPT is a wedge thread. If the threads are cut too deep, then the ID of the female port is over-sized. I am certain that the ports would fail a No-Go test. I applied three wraps of PTFE tape. This is the appropriate amount of tape for NPT installation. Having to use excessive wraps of PTFE tape means that there is less thread engagement meaning a weaker union.I will attempt to remove the gaskets under the gauges and add more PTFE tape on the 1 inch NPT unions. Given the relatively low pressure (under 80 psi) there should be little risk of the union separating as the force generated at 80 psi is under 110 lbs. Stopping the leak at the inlet/outlet will make or break this purchase.UPDATE- I removed the leaking 1 inch NPT fittings, cleaned off all PTFE remnants and put 8 wraps of PTFE on the fitting threads. Then I removed the two gauges that were not showing pressure. As I suspected, the rubber gaskets installed in the 1/4 inch NPT port were causing the gauge not to read. I Removed both gaskets from each port, cleaned off all PTFE remnants (ports and gauge threads) and put 3 wraps of PTFE on the threads. After installation I opened up the system to water pressure and NO LEAKS, plus all of my gauges are working!NOTE- I noticed a drop of water on the right side of my single stage housing. I’ll monitor and fix if necessary.
KID307 –
Well water NOW drinkableDo you use Britta pitchers for well water? We did and NOW we don’t. I had my plumber install this water filtration system yesterday. Was it easy? No, because you’re limited to the inlet being on the LEFT side only on this unit. Luckily my plumber saw this OR I would have rated this 5 stars instead of 4 for easy to install. Copper is not cheap and when you have to loop the copper in order to install this you’ll understand. As for the water quality it’s crystal clear right and I don’t hesitate to drink my own well water now.So that you understand my system I’ll give you the order of what I have:1) Water comes in and goes first through an IRON tank, then through2) The water softener, then through3) The sediment spinner filter, then through4) The Express Standard Whole House water filters (this item), then through5) My water pressure booster as I didn’t want to lose water pressure throughout my house.Issue #1 – you MUST put plumber sealer on the o-rings at the top of each of the 3 water filter canisters BEFORE you turn on the water to your system or they will LEAK. Luckily this was an easy fix but something hopefully you will NOT forget to do after reading this review.Water will fill your gauges but no worries, that is normal and it didn’t affect registering the pressure. I didn’t have the gauge leaks that others reported on their systems. I had my plumber put in gauges before the water filtration system and after my water pressure booster so I know what pressure I have coming from my well and what’s going out of my pressure booster into my pipes.It’s week #1 – I’ll come back and revise my review with pictures and again after a couple of months of use.
James C Kinney –
Broken psi gaugesThis is a well designed filter, essentially three big blues tied together with a stainless steel cage. The only problem I have is they used faulty psi gauges and exchanging them is apparently not a thing, at least not without exchanging the whole unit.
Nelson –
GreatJe m’alimente en eau d’un puit artésien et l’odeur d’œufs pourri était vraiment insupportable. J’étais septique au rebut que ce système la règlerait mon problème mais non c’est incroyable, plus d’odeurs du tout, plus de trace de fer non plus. Je suis vraiment content de mon achat. Je recommande sérieusement.
Claude Chartier –
Satisfait du produitCet équipement de Express water a été très facile à installer. Il est certain qu’une plomberie en PEX est un jeu d’enfant. Ce système me coûte beaucoup moins cher que ce que voulait me vendre le commerce de pompes local.Mon problème d’odeur de souffre et de goût de sel en raison de mon autre équipement ont été complètement réglé.Je suis donc pleinement satisfait et après neuf mois d’utilisation, je n’ai pas encore changé les filtres. Je pense le faire dans trois ou quatre mois.
Client d’Amazon –
Qualité et prixExcellent produit. L’eau très claire après la filtration. Bien impressionné.
DANIEL –
probleme de souffremon eau n’a plus d’odeur enfin
mitchell cheney –
works great. took the egg smell awaythis worked great. we had rotting egg smell in the water. this filter took the smell away. it was packed great and very easy to install. Any DIYer could install it.