Description
This kit includes: 1 KERDI-SHOWER-T/-TS/-TT shower tray 38″ x 60″ 2 KERDI-BOARD-SC shower curbs 38″ x 6″ x 4-1/2″ 1 roll KERDI waterproofing membrane 3′ 3″ x 33′ = 108 ft2 1 roll KERDI-BAND waterproofing strip 5″ x 33′ 1 KERDI-DRAIN ABS flange with 2″ outlet 4 inside & 2 outside KERDI-KERECK preformed waterproofing corners 1 KERDI-SEAL-PS pipe seal 3/4″ 1 KERDI-SEAL-MV mixing valve seal 4-1/2″ Please note: Drain grate is sold separately Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
Robert K. –
Excellent Product for bathroom remodelAfter my bathroom remodeling contractor demolished the old bathroom, I asked how he plan to construct the shower pan. He said the old fashion way with concrete backer board. While I was at a tile store picking up the floor and wall tiles, I noticed the Schluter shower kit and asked the sales representative for a brochure. After reading the Schluter brochure, I convinced the contractor to use the product and agreed to pay the differential for any labor and material costs over his original bid price. The contractor loved using the product and it gave me peace of mind knowing I will not have a water damage issues in the long run. The contractor ended up using the Schluter products (Ditri, Kerdi, all set thin set mortar, and profiles) on the other two bathrooms including the master bathroom.
Youhaftabekidding –
I rolled the dice on thisWhile planning my upper floor bathroom remodel, I was all primed to build a mortar shower pan in place. Lots of work involved so I was hoping to find some trick, new system that would keep me from doing that. Then I scored!. I coincidentally ran across the ads for this product, went to their website, and watched all of the videos over and over again! I finally decided to take a chance and install this over hardiebacker. The concept seemed sound. After a long day I finally got it all installed, including a 38“ x 60“ pan and 5 feet of curb. Everything went well but be warned, if you haven’t done any of this kind of work before this will be very difficult to do. And your rough plumbing has to be very precise so make sure you are comfortable performing that work as well. You have to be somewhat handy to understand the concepts and to use the tools and materials required. The biggest surprise was how incredibly sloppy and messy the process is! I had as much or more thinset (UNmodified, of course! ) on me as I did on the walls and for some reason my finished product didn’t look as neat and pretty as the one in the Schluter videos. I also used their drain system and then later installed their grate in conjunction with my floor tile. Everything now works perfectly and time will tell if it’s all really waterproof. I didn’t dock it any stars for this but it is way overpriced for what it actually is. But all-in-all, this was easier than building a pan and drain system from scratch.
J. Shepherd –
Good pan, but seriously there’s only two 38” curbs… no 60” curb for a 60” kit.Many other reviewers have commented on this… I didn’t notice until after I purchased it, but this is a KIT for a 38” x 60” shower pan, but it comes with two 38” long curbs. I genuinely can’t understand what Schluter would create a kit that doesn’t include enough curb for the shower they sized the pan for. I had to spend another $90 to get a 60” long piece of curb separately. In addition, I strongly recommend you buy their proprietary mortar blend. Generic I modified thin set was not “sticky” enough to easily embed the provided seam tape to create waterproof joints. It took a lot of finesse to get the tape to lay flat using I modified thin set. On the positive side, I think the drain setup is easier to work with and of higher quality than other kits I’ve worked with and the kit being based on prebuilt pieces made it easier to assemble and adjust to fit… if you aren’t working in new construction and don’t have perfectly flush, level, square, and straight walls and floors, this is the best kit to use. Our house is 180 years old and to make the pan fit the opening, I trimmed the pan such that it ended up 36.25” on one side and 36” on the other and it worked flawlessly.
jasonwil25 –
Will save you money!!!The hardest part of a shower pan is creating the slope. This system allows you to easily install.
John C –
Excellent kitExcellent kit and surprisingly easy to install for a DIY’r. Our shower had been leaking and came to found out there had been no waterproofing installed and a very old mortar shower pan that wasn’t correctly installed to the drain. I was dreading installing the shower pan until I discovered this kit made the shower pan an easy install. Water tested it and was incredibly impressed with no leaks.
TechTestimony –
If you’re building a shower, this is the way to go! You’ll probably need some extra curb though…This is an excellent system that works as described. When installing it, make sure to use unmodified thinset! If you use a modified thinset it will not bond properly to your base material. I knocked a star off of this particular package because they don’t provide enough curb in the package to go around the pan that’s provided in the package… not sure why. I cut my pan down to 54″x38″ and only needed curb on 2 sides but still had to buy an extra piece of curb!
Amazon Customer –
Really unsure about this productThe supply stores rave about this product but it’s quite a bit more difficult to install than the manufacturer makes it out to be, I also installed a corner bench, thought i would never finish installing all the corner flashings and it’s really expensive for what it actually is, some special fabric and foam board base, they need to lower there prices on this stuff.. and don’t forget that you have to use an unmodified thin set to install it with!! try getting that at a box store( good luck), they don’t even know what that is. I’m a general contractor and seriously doubt I’ll use this product again!! BTW, you can get the required modified thin set at a tile store but it will cost you ( $ 35+ for one 50lb bag.
Jim & Crystal –
ABS plastic needs special adhesive to attach to PVCThe drain is made of ABS plastic, nowhere did it specify that it needs special accommodations to be attached to existing PVC, such as ABS to PVC adhesive. Just a forewarning! Otherwise great product!!!
Drageta –
Farmhouse renoEasy to install, durable material,Would recommend to anyone, you dont have to be a professional or spend alot of money to get good product.
Amazon Customer –
It may cost a lot but saves so much timeWorked out great. Be very careful with your trowel once this is installed.